1. Cooling down various children's amusement equipment should be "adapted to local conditions"
The following are the common ways to cool down:
First, put up awnings and parasols on the top of small children's amusement equipment. This is suitable for products with a relatively small operating area, such as swing machines, carousels, inflatable models, happy spray ball cars, etc., which cover an area of dozens of square meters to more than 100 square meters;
Second, physical cooling, when there are no guests or when there are fewer customers, water spraying can be used to cool down. It is suitable for products that are not convenient to build sunshade measures outdoors, such as track trains, amusement trains, bumper cars, and rapids. Most of the amusement equipment is made of fiberglass outside, which is not afraid of wind and rain, and can be physically cooled!
2.Regular maintenance of children's amusement equipment is essential to ensure safety. How can children's amusement equipment maintain better operating capabilities under high temperatures and heat? The weather is too hot, and children are the main users of amusement equipment. Parents are reluctant to let their children ride on overheated equipment. Therefore, during the off-season for children's amusement equipment, the number of child visitors can be increased by cooling the equipment. It is best to operate new types of children's entertainment equipment in the summer, such as indoor children's amusement products, to avoid this problem. In addition, to avoid the scorching sun, children's playgrounds can also open evening venues appropriately. Some children and parents will choose to go out to play and go shopping at night, allowing tourists to experience the joy of playing. At the same time, the beautiful lights at night can also give tourists a different visual enjoyment.
Maintenance points:
For plastic parts and fiberglass, use soapy water, disinfectant detergent, or bleaching powder to dilute and soak, then scrub with a soft cloth or soft brush. Rinse with clean water, wipe dry with a clean cloth, or dry in the sun. Spray with disinfectant for disinfection.
The soft sponge part can be scrubbed with a soft cloth dipped in soapy water or placed in the sun for disinfection.
The moisture-resistant, heat-resistant, and non-fading wooden parts can be soaked in soapy water and then dried, then sprayed with 84 disinfectant for disinfection.
For metal parts requiring rust removal, use a brush to remove the rust and wipe with a dry cloth. After exposure to the sun, use colorless Sanhe brand spray paint from a distance of about 20 cm. Spray once while sweeping, and spray again after it dries for protection. After the paint is completely dry, wash, dry, and disinfect.
When cleaning the circuit and electrical parts, first ensure the power is off, and do not use water. Generally, wipe them with a wet cloth and connect to the power supply only after they are completely dry.
All children's amusement equipment, outdoor slides, and drill tubes should not have water accumulation after rainy days. If there is water, drill a 4mm diameter hole at the lowest point for drainage.
For indoor activity rooms, floors, walls, etc., disinfect with ultraviolet light daily and ventilate the room frequently. Spray and disinfect with hydrogen peroxide once a week.
While disinfecting, check whether the connection parts are firm, refuel the metal frequently active connection parts, check if the circuit and electrical appliances are damaged, and ensure no sharp edges are left on any parts.
